NEWS PROFILPROJEKTOR STARRETT HF 600 Calibration Laboratory No. 2277 is modernizing its calibration equipment in line with developments in the field of length / plane angle measurement. With the development of new standards in the field of calibration, we emphasize the maximum accuracy of measured values during the calibration of our customers‘ gauges and measuring…
NEWS Automated Calibration System for End Gauges March 1, 2022 CZ.01.1.02/0.0/0.0/21_374/0026776 The main objective of the project is to develop a completely new, fully automatic system for the calibration of gauge blocks in the range up to 100 mm, to adopt new project management principles, and to acquire new knowledge in the field. TLO Publicity-a3horizontal
NEWS New Climate and Corrosion Tests The testing laboratory has expanded its scope of accreditation to include a new field of testing: corrosion testing (salt spray tests – NSS, ASS, CASS, cyclic corrosion testing, condensation tests) climatic testing (cold, dry and damp heat, temperature change, humidity) The testing laboratory is equipped with three Ascott corrosion…
NEWS We performed NDT tests on the gas storage tank The testing laboratory has completed NDT testing of the gas holder in Třinec. Staff from the testing laboratory performed a defectoscopy inspection of the welds during the reconstruction of the shell of the gas holder, which has a diameter of 69,400 mm, with a total…
NEWS New Storage for Calibration Sheets We are offering a new online calibration certificate storage service for all new and existing customers. The service is free, and it allows you to conveniently view or download your company’s calibration certificates, no matter where you are! For more information on logging into this service, please contact us…
NEWS Extension of Authorization We have expanded our authorization to include the products specified in Section 12 of Annex 4 to Government Regulation No. 176/2008 Coll.: Machinery for underground work of the following types, specifically Section 12.2: Hydraulically operated mechanized support systems.
NEWS Preventive Measures Against the COVID-19 Virus The company Technické Laboratoře Opava, joint-stock company continues to operate in standard mode. We would like to ask our customers in advance for their leniency and understanding regarding the situation and measures. In view of the nationwide COVID-19 virus infection, our company has adopted the following measures: business…
NEWS Authorization to Perform Inspections We have obtained authorization from the Technical Inspection Authority of the Czech Republic to perform inspections, inspection tests, and tests on designated lifting equipment, including inspections of elevator electrical systems.
NEWS Extension of Authorization We have expanded our authorization to include the products defined in Item 17 of Annex 4 to Government Regulation No. 176/2008: Equipment for lifting persons or loads where there is a risk of a fall from a height exceeding a vertical distance of more than 3 meters.
NEWS Elevator Assessments and Inspections We have been authorized to act as a notified body for the conformity assessment of products pursuant to Act No. 90/2016 Coll. and Government Regulation No. 122/2016 Coll., on the conformity assessment of products and their safety components.